Tag LED投光灯

Waterproof LED module / LED street light kits is a series of product of components for LED street light, led canopy light LED tunnel light , the module is designed with waterproof rate, can be assembled for industrial led fixtures, high lumen output .

Product Features:
1. The waterproof LED module can be widely used for all kinds of LED industrial fixtures . 
 LED street light ,led flood light ,led tunnel light , LED canopy light ,LED high bays  
2. Cree/Philips Chip are optional 
3. excellent light output ; 165lm-210lm/Watt (7070SMD lamp beads) 
4. Waterproof  IP67 
5. 6063 Aluminum housing
6. 5 years warranty 

Advantages of LED glass lens floodlights:

1. Energy-saving and efficient: LED lamps are more energy-saving and efficient than traditional lamps. The energy conversion efficiency of LED light sources is high, which can better leverage the energy-saving advantages of LEDs.
2. High brightness: The LED light source used in LED lamps has the characteristics of high brightness and high color temperature, which can effectively improve lighting brightness and color reproduction.
3. Long life: The life of LED lamps is usually relatively long, which can reach more than tens of thousands of hours, reducing the frequency of bulb replacement and maintenance costs.
4. Environmental protection and health: LED lamps have no ultraviolet and infrared radiation, do not contain mercury and other toxic substances, and do not pollute the human body and the environment.
5. Safe and reliable: LED lamps have low calorific value and are safe and reliable to use. The lens design can effectively prevent glare and improve lighting comfort.
6. Good light projection effect: The LED glass lens design can better control the light distribution and focusing effect, and is suitable for places that require spotlight lighting.
7. Beautiful and practical: LED glass lens floodlights have a stylish and beautiful appearance and are suitable for various indoor and outdoor lighting places, improving the overall beauty of the lighting environment.

The glass lens connected board design breaks through the traditional PC connected board lens used in the module, bringing a brand new experience and effectively overcoming the
Solve the bad problems of PC lens:

1. Corrosion resistance: High borosilicate 3.4 glass belongs to borosilicate glass among borosilicate glasses. It is acid and alkali resistant and has excellent corrosion resistance.
2. Strong temperature resistance: Compared with PC lenses, its thermal expansion coefficient is lower, it has good thermal stability, the temperature change of the optical surface is small, and it retains
   Original optical lighting effects.
3. High light transmittance: The light transmittance of conventional PC lenses is about 85%, resulting in a waste of light. The light transmittance of glass lenses is 90-92%, and anti-reflection coating is added.
   After film, it can be as high as 97%.
4. Compared with PC lenses, glass lenses will not produce aging/yellowing phenomena, thereby affecting the lens transmittance.
5. Compared with PC lenses, glass lenses do not absorb dust and are easy to clean.
   Tunnel lighting distribution
   Various light distribution angles such as 120°×80°, 150°×80° (symmetrical), reasonable illumination uniformity and anti-glare level settings
   It is designed to effectively improve the wall lighting conditions of the road surface in the tunnel, improve the visual enjoyment in the tunnel, and reduce driver fatigue. Road lighting
   There are various light distribution angles such as TYPE2-M and TYPE3-M. The light distribution forms a quasi-rectangular light spot with uniform illumination on the road surface, which can be applied to two-way eight-lane, six-lane, four-lane, two-lane, and one-lane road conditions. High pole light distribution
   It is used in large squares, main road intersections, docks, stations, stadiums and other places with high hanging height and wide lighting range.
   Wide and uniform, it can bring better lighting effects and meet the lighting needs of large areas. Industrial and mining lamp light distribution
   Luminous angle 45°/60°/90°/120° (25° under development), mainly used in building exterior walls, bridges, parks, advertising signs, stadium squares, and factory workshop lighting.

LED玻璃透镜投光灯的优势:

1. 节能高效：LED灯具相比传统灯具能够更加节能高效，LED光源的能量转换效率高，可以更好地发挥LED的节能优势。
2. 高亮度：LED灯具使用的LED光源具有高亮度和高色温的特点，可以有效提高照明亮度和色彩还原度。
3. 寿命长：LED灯具的寿命通常比较长，可以达到数万个小时以上，减少了更换灯泡的频率和维护成本。
4. 环保健康：LED灯具无紫外线和红外线辐射，不含有汞和其他有毒物质，对人体和环境没有污染。
5. 安全可靠：LED灯具的发热量低，使用安全可靠，透镜设计可以有效防止眩光，提高照明舒适度。
6. 投光效果好：LED玻璃透镜设计可以更好地控制光的分布和聚光效果，适用于需要聚光照明的场所。
7. 美观实用：LED玻璃透镜投光灯外形时尚美观，适用于各种室内和室外照明场所，提高了照明环境的整体美感。

玻璃透镜连板设计，突破了传统的模组采用的PC连板透镜，带来一种全新的体验，有效地克服
了PC透镜的不良问题：
1、抗腐蚀能力：高硼硅3.4玻璃属于硼硅酸盐玻璃中的硼硅玻璃，耐酸耐碱，抗腐蚀性能优越。
2、耐温性强：相比PC透镜，其热膨胀系数较低，拥有良好的热稳定性，光学表面温度的变化小，保留
原有的光学照明效果。
3、透光率高：常规PC透镜透光率在85%左右，造成光照的浪费，玻璃透镜透光率为90-92%，镀加增透
膜后可高达97%。
4、相比于PC透镜，玻璃透镜不会产生老化/黄化现象，从而影响透镜透光率。
5、相比于PC透镜，玻璃透镜不会吸附灰尘，并且方便清洗。
隧道照明配光
发光角度120°×80°、150°×80°（对称）等多种配光角度，合理的照度均匀度和防眩光等级等设
计有效的改善隧道内路面的墙壁照明状况，改善隧道内视觉享受，减轻驾驶员驾驶疲劳。道路配光
有TYPE2-M、TYPE3-M等多种配光角度，其配光在路面形成照度均匀的类矩形光斑，可以适用于双向八车道、六车道、四车道、二车道、一车道道路情况。高杆灯配光
应用于大型广场、主干道交叉路口、码头、车站和体育场等场所中，悬挂高度较高，照明范围比较广
泛而且均匀，能够带来较好的照明效果，满足大面积场所的照明需求。工矿灯配光
发光角度45°/60°/90°/120°（25°开发中），主要应用于大楼外墙、桥梁、公园、广告招牌、球场广场、工厂车间照明。

New

The Garteng® GLF01 Series Cobra Head is optimized for customers seeking a lighting solution for large areas, major roadways, freeways and expressways.

Garteng® GLF01

Features & Benefits

Advantages of Garteng LED lighting fixtures

1. Fast heat dissipation and more durable products
2. Excellent lighting distribution and better lighting effect
3. Less light decay, extending service life
4. Beautiful appearance and unique product design
5. Good components and better quality
6. Better quality, with a lifespan of over 10 years
   Advantages of glass lenses
   The glass lens connecting plate design breaks through the traditional PC connecting plate lens used in modules, bringing a brand new experience and effectively overcoming the adverse problems of PC lenses:
7. Corrosion resistance: High borosilicate 3.4 glass belongs to borosilicate glass, which is acid and alkali resistant and has superior corrosion resistance.
8. Strong temperature resistance: Compared to PC lenses, their thermal expansion coefficient is lower, they have good thermal stability, and the optical surface temperature changes are small, retaining the original optical lighting effect.
9. High transmittance: The transmittance of conventional PC lenses is around 85%, causing waste of light. The transmittance of glass lenses is 90-93%, and can reach up to 97% after coating with antireflective film.
10. Compared to PC lenses, glass lenses do not experience aging/yellowing, which affects the lens transmittance.
11. Compared to PC lenses, glass lenses do not absorb dust and are easy to clean.
    Tunnel lighting distribution
    Luminous angle 120 ° × 80 °, 150 ° × Multiple light distribution angles such as 80 ° (symmetrical), reasonable illumination uniformity, and anti glare levels
    Design effective improvements to the wall lighting of the road surface inside the tunnel, improve visual enjoyment inside the tunnel, and reduce driver fatigue. Road light distribution
    There are various light distribution angles such as TYPE2-M and TYPE3-M, which form a rectangular shaped spot with uniform illumination on the road surface,
    It can be applied to two-way eight lane, six lane, four lane, two lane, and one lane roads.
    High pole light distribution
    Applied in large squares, intersections of main roads, docks, stations, and sports venues, with high suspension height and relatively large lighting range
    Widely and evenly distributed, it can bring good lighting effects and meet the lighting needs of large areas.
    Lighting distribution for industrial and mining lamps
    Luminous angle 25 °/45 °/60 °/90 °/120 °, mainly used for building exterior walls, bridges, parks, advertising signs, stadium squares
    Factory workshop lighting.

WHERE TO BUY

More new product brochures

Specifications

Product Documents

Spec Sheets

OLP3220-GarTeng-GLF1-LED-Floodlight-Spec-Sheet

696 KB

2023-08-17

Installation Guides

Custom Engineered Reflective Optic and Flat Glass Technology

Reflective optics and Flat Glass technology optimize application efficiency and minimize dirt depreciation, lighting only what you need for a long time.

Designed and Assembled in The USA

The entire Current Roadway street light portfolio is designed and assembled by our industry leading team in our state of the art manufacturing center in Hendersonville, NC.

LightGrid+™ Compatible

Current’s Cobra Head portfolio is compatible with LightGrid+™. LightGrid+™ allows municipalities and transportation departments the ability to remotely monitor energy consumption, detect failures, dim fixtures remotely and achieve real time energy metering.